Kirkland Chimney Pros logo

Kenmore, King County

Chimney Waterproofing in Kenmore, WA

Chimney waterproofing in Kenmore costs $285 to $795. A short stack with one flue prices near the bottom; a tall chimney with several exposed faces above the roofline prices near the top. The treatment is a vapor-permeable water repellent: liquid water beads off the face, yet vapor already inside the brick is free to escape.

Typical investment

$285–$795

  • Serving Kenmore and the rest of our King County territory
  • $99 plus tax on-site inspection, credited toward an approved quote
  • Usually on the same route as Kirkland, Woodinville, Bothell
  • Local crews
  • Licensed & insured
  • Documented work
  • Written quote first

Book an inspection

Book your $99 inspection

$99 plus tax, deducted when you approve the repair

Service
Town

Book your $99 inspection

Pick a real open slot on our crew's calendar — takes about a minute.

  • No payment to book
  • Written on-site quote
  • Photos of every job
  1. 1
  2. 2
  3. 3
  4. 4

Chimney Waterproofing in Kenmore

Pick a date
October 2026
Su
Mo
Tu
We
Th
Fr
Sa
Open times

Loading open times…

Not sure where to start

What's going on with your chimney?

Pick what you're seeing at your Kenmore home — we'll point you to the right fix.

What we do

Other chimney services in Kenmore

The same crew, the same written quote — for Kenmore homes.

Ranges shown for orientation — the exact figure is written up on-site, after the inspection.

Why Kenmore homes need chimney waterproofing

Kenmore's brick chimneys spend most of the year damp. From October to spring, rain arrives on more days than not, and a stack standing above the roofline catches it on every face. Brick and mortar are porous; left bare, they soak up water all season and dry out only in summer.

Common brick on 1950s and 1960s ranches

The King County survey of Kenmore describes Uplake Terrace, platted in 1953 on a hillside above the lake, as mostly Ranch and Split Level houses of the 1950s and early 1960s. Citywide, the Census dates 2,741 homes to the two decades from 1960 through 1979.

Brick of that era has already absorbed decades of rain. Where the stack has been repointed and the crown repaired, a repellent is a sensible last step to protect that investment.

Your chimney waterproofing in Kenmore: what's included

Every chimney waterproofing we do in Kenmore includes:

  • Check of the crown, joints and brick before any product goes on
  • Cleaning of loose debris, moss and deposits from the surface
  • Masking of the roof, siding and flashing around the stack
  • Breathable, masonry-specific repellent on every exposed face
  • Coverage from the crown down to the roof line
  • Notes on when a re-application is likely to be due

Signs you need chimney waterproofing in Kenmore

  • Brick that stays dark for days after the rain stops
  • White powdery deposits on the chimney outside or in the attic
  • Recent repointing or crown work that you want to protect
  • Damp smell from the fireplace during wet weeks
  • Moss or algae growing on the shaded face of the stack

Smoke coming back into the room, or a smell that won't go? Book the inspection first.

Book now

Why Kenmore homes need it

Water held in the masonry is what drives most chimney decay here: spalling faces, crumbling joints, white mineral bloom, rusted steel at the damper and stains on the ceiling beside the chimney. Waterproofing slows that cycle down, but only on masonry that is already sound. On a cracked crown or open joints, it is money spent in the wrong order.

Seventeen wet days in a Kenmore November

WeatherSpark counts about 17.1 wet days in an average Kenmore November, the wettest month, with December skies mostly or fully clouded over for roughly 72 percent of the month. In the state's inland lowland valleys, the regional climate center measures January humidity near 87 percent at 4 a.m., easing only to about 78 percent by 4 p.m.

Rain on most days and little sun or dry air to evaporate it: that is why unprotected brick here stays wet so long, and why a repellent earns its place on a sound chimney.

Your chimney waterproofing in Kenmore, step by step

  1. 1

    Confirm the masonry is ready

    Cracks and open joints are repaired first; treating over them would seal water in rather than out.

  2. 2

    Clean and dry

    We clear the surface and wait for a dry window, since the repellent has to go onto dry brick to soak in.

  3. 3

    Apply in full coats

    The product is applied until each face is saturated, from the crown down to the flashing.

  4. 4

    Test the result

    Water sprayed on the finished brick should bead and run off; we photograph that for your records.

Chimney Waterproofing prices in Kenmore

What this work is quoted at for Kenmore homes — the exact figure comes from the $99 on-site inspection, credited toward the work.

Chimney Waterproofing prices in Kenmore — published rates, 2026
ServicePrice in KenmoreWhat that covers
Chimney Waterproofing$285–$795Breathable sealer — reapplied every 3–5 years in this climate
Chimney Sweep$189–$459Full flue swept, Level 1 inspection included
Chimney Inspection$99 plus taxLevel 1 visual; Level 2 adds a full camera scan
Chimney ReliningFrom $1,900Full-length stainless liner, sized to the appliance
Chimney RepairFrom $425Masonry repair — brick and mortar, scoped after diagnosis

Ranges are what these jobs are quoted at in Kenmore. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.

Why a sound crown comes before any coating

The 2021 Washington State Residential Code sets how a chimney meets the roof and the weather: 3 feet or more clear of the roof where it exits, 2 feet above anything within 10 feet, and a cricket, flashed and counterflashed, on a stack wider than 30 inches that does not reach the ridge.

A repellent does not replace any of that. If the height, the crown or the cricket is wrong, water will find its way in regardless, so we flag those issues before quoting a treatment. Since March 15, 2024, King County has applied the 2021 codes to complete applications.

Around Kenmore

Kenmore is a city on the northernmost shore of Lake Washington, where the Sammamish River meets the lake, on Lake Washington, with Ranch and Split Level houses from the 1950s and early 1960s beside newer homes, for a median build year of 1985. We work every part of it — Uplake Terrace included.

KenmoreKing County, WA · 47.757, -122.244

Before and after

What the work changes

Illustrations of what each repair changes on a typical chimney — not photos of a specific job.

The local chimney sweep crew serving Kirkland, WA

From booking to done

Four steps, each one on paper — so you always know what happens next.

  1. 1

    Book online

    Choose a genuine opening on the crew's calendar. Confirmation is immediate.

  2. 2

    On-site inspection

    Liner, crown, cap, flashing and masonry examined in order — each finding photographed.

  3. 3

    Written quote

    One document, plain numbers, covering only the work your chimney genuinely needs.

  4. 4

    Work done & documented

    The repair is completed, then handed over with before-and-after photos of every item.

Chimney Waterproofing in Kenmore — common questions

How much does chimney waterproofing cost in Kenmore?

$285 to $795. Where you fall depends on the stack's height, how many sides stand clear of the roof, and the prep work the surface needs.

How long does waterproofing last?

Several years, depending on the product and how exposed the chimney is. The south and southwest faces usually weather first, and we note when to check again.

Can you waterproof in winter?

Only in a real dry spell, because the brick must be dry for the repellent to penetrate. Late spring through early fall is the easier window in Kenmore.

Get in touch

Book an inspection

Need your chimney checked in Kenmore?

A $99 on-site inspection, a written quote before any work, and photos of every item we touch.

Call (425) 793-2992Book