Kirkland & the Northshore, WA
Gas fireplace service in Kirkland covers the burner, pilot, logs, glass and venting, so the fireplace lights reliably and sends its exhaust outside.
Our price
$189–$479
Book an inspection
Book your $99 inspection
$99 plus tax, deducted when you approve the repair
Not sure where to start
Pick what you're seeing — we'll point you to the right fix.
What we do
Sweeping, inspection, relining and masonry — one local crew for the whole chimney.
A chimney inspection in Kirkland shows whether the flue, liner, crown and flashing are sound before you light a fire, sell a house or head into another wet season.
Learn more
A chimney sweep in Kirkland takes out the soot and creosote that a winter of fires leaves in the flue, so the next season starts with nothing in there to burn.
Learn more
Chimney repair in Kirkland fixes the brickwork, firebox and structure of a chimney that is letting in water or losing its shape.
Learn more
Chimney relining in Kirkland puts a new stainless liner inside a flue whose clay tiles are cracked, missing or the wrong size for the appliance.
Learn more
A chimney cap installed in Kirkland keeps rain, leaves and nesting animals out of the flue and, with a screen, stops sparks from leaving it.
Learn more
Gas fireplace service in Kirkland covers the burner, pilot, logs, glass and venting, so the fireplace lights reliably and sends its exhaust outside.
Learn moreRanges shown for orientation — the exact figure is written up on-site, after the inspection.
Natural gas heats a large share of the homes we serve: the Census reports about 48.5% of Kirkland's occupied housing uses utility gas as its main heating fuel, and many more homes have a gas fireplace or insert for comfort. Gas burns clean, so there is little to sweep, but pilots fail, burners clog, log sets shift, glass clouds over, and vents can be blocked by nests or loosened by weather. We service the appliance and check the vent from end to end, then light it and watch the flame before we leave.
Lakefront homes in Kirkland and Kenmore often have direct-vent gas fireplaces venting through an outside wall. Those wall terminations are easy for birds and debris to block and deserve a look on every service.
A gas fireplace that is never serviced tends to stop lighting at the worst moment, and a blocked vent turns a clean-burning appliance into a carbon monoxide risk.
Every gas flame makes carbon monoxide, and the vent is what carries it outside. A bird's nest in the termination, a separated vent joint or a liner corroded by condensation can keep it indoors instead, and CO has no smell to warn you. A yearly service checks the vent path as well as the appliance, and a working CO alarm near the bedrooms covers the rest. Installing or replacing gas appliances also involves permits: Woodinville, for one, lists gas inserts, gas logs and gas fireplaces among the mechanical fixtures to declare on its permit form.
How it works
Gas off, glass removed, logs lifted out.
Burner, pilot, ignition parts and the firebox are cleaned and tested.
From the fireplace to the outside termination, looking for blockages and gaps.
Flame pattern, ignition and CO reading checked before we leave.
Licensed& insured Washington chimney contractor
4 communitiesAcross the Northshore, King County
$99 plus taxInspection, credited toward an approved quote
Every jobDocumented with before-and-after photos
If any of these sound familiar, book the $99 plus tax inspection — credited toward the work if you approve the quote:
By town
The 4 Northshore communities we serve. Pick yours for local scheduling and the chimney issues we see there.
Before and after
Illustrations of what each repair changes on a typical chimney — not photos of a specific job.
Before
After
Before
After
Before
After
Four steps, each one on paper — so you always know what happens next.
Choose a genuine opening on the crew's calendar. Confirmation is immediate.
Liner, crown, cap, flashing and masonry examined in order — each finding photographed.
One document, plain numbers, covering only the work your chimney genuinely needs.
The repair is completed, then handed over with before-and-after photos of every item.
Before you let anyone in
Every fact below is one you can check yourself before we ever set foot on your roof.
The on-site inspection is $99 plus tax, and it is credited toward the work when you approve the written quote. Booking online asks for no card.
You get the price in writing, for the work your chimney actually needs, and nothing starts until you have approved it.
Each item we inspect or repair is photographed before and after, so the condition of your chimney is on record.
Call (425) 793-2992 — a local Northshore number, the same one on every page of this site.
Licensed& insured Washington chimney contractor
4 communitiesAcross the Northshore, King County
$99 plus taxInspection, credited toward an approved quote
Every jobDocumented with before-and-after photos
Serving the Northshore, Kirkland to Woodinville
Yes. There is little soot to remove, but the pilot, burner, glass and especially the venting all need checking so the fireplace lights reliably and vents safely.
Our range is $189–$479 for a service visit. Replacement parts are quoted separately if we find something that needs replacing.
The Puget Sound Clean Air Agency's bans are written for wood-burning devices and, at Stage 2, pellet stoves; gas does not appear in them. The agency's notice for the day is the final word.
A white film is usually mineral residue from combustion; dark soot points to a burner or log placement problem. Either way we clean it and find the cause.
In many cities, yes. Woodinville lists gas fireplace inserts and gas logs on its mechanical permit form, and Bothell's residential mechanical form has a line for gas log inserts. We check the rule for your town before the work.
See gas fireplace service pricing in detailMore chimney questions
A chimney sweep in Kirkland takes out the soot and creosote that a winter of fires leaves in the flue, so the next season starts with nothing in there to burn.
Learn moreA chimney inspection in Kirkland shows whether the flue, liner, crown and flashing are sound before you light a fire, sell a house or head into another wet season.
Learn moreChimney relining in Kirkland puts a new stainless liner inside a flue whose clay tiles are cracked, missing or the wrong size for the appliance.
Learn more| Service | Price in Kirkland | What that covers |
|---|---|---|
| Gas Fireplace Service | $189–$479 | Annual service and tune-up; repairs quoted after diagnosis |
| Chimney Sweep | $189–$459 | Full flue swept, Level 1 inspection included |
| Chimney Inspection | $99 plus tax | Level 1 visual; Level 2 adds a full camera scan |
| Chimney Relining | From $1,900 | Full-length stainless liner, sized to the appliance |
Ranges are what these jobs are quoted at in Kirkland. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.
Licensed local crews, a $99 on-site inspection credited toward repairs, and a written quote before any work. Book a real open slot on our calendar.
