Kirkland Chimney Pros logo

Chimney Relining cost · Kirkland & the Northshore, WA

How much does chimney relining cost in Kirkland, WA?

From $1,900

What we charge for chimney relining.

We charge from $1,900 for chimney relining in Kirkland and the Northshore. Full-length stainless liner, sized to the appliance. The exact figure is set in writing after the $99 plus tax inspection, credited toward an approved quote, and you approve it before any work starts.

Chimney Relining in Washington — stainless steel chimney liner being installed
  • From $1,900 — what we charge for chimney relining
  • $99 plus tax on-site inspection, credited toward an approved quote
  • Written quote before any work starts — you approve the price

What the price includes

What you get for the price

  • Full-length stainless liner, sized to the appliance
  • A $99 plus tax on-site inspection first, credited toward an approved quote
  • A written, itemized quote with photos — you approve the price before any work starts

How it compares to the rest

What we charge for each service. Chimney Relining is highlighted.

What we charge for chimney services in Kirkland and the Northshore, WA
ServiceWhat we chargeTypical Northshore priceWhen you need it
Chimney Sweep$189–$459$70–$279.95Annual maintenance, or you burn regularly and it has been a year
Chimney Inspection$99 plus tax$99.95–$811Buying or selling a house, after a chimney fire, or before a new appliance
Chimney ReliningFrom $1,900no Northshore data publishedCracked clay liner, an unlined chimney, or fitting a stove or insert
Chimney RepairFrom $425$120–$3,000Cracked bricks, open mortar joints, a leaning or spalling stack
Chimney Cap Installation$235–$850from $199.95Missing or rusted cap, rain or animals getting into the flue
Masonry Repair (Crown / Repointing)From $475$150–$550Cracked or crumbling crown, failing mortar joints across the stack
Chimney Waterproofing$285–$795no Northshore data publishedWhite staining on the brick, or damp showing inside
Chimney Flashing Repair$375–$1,500$300–$550Water stains on the ceiling around the chimney
Gas Fireplace Service$189–$479no Northshore data publishedAnnual service, or the unit will not light or stay lit
Creosote RemovalFrom $245no Northshore data publishedSeveral seasons since the last sweep, or a hard glaze in the flue
Dryer Vent Cleaning$105–$295no Northshore data publishedClothes need two cycles, or it has been over a year
Air Duct CleaningFrom $525$357–$415After a renovation, or after water damage

Market rates observed on the Northshore (King County, WA), surveyed September 29, 2026 — not our quote. Sources: Emerald City Chimney (Kirkland) — Prices, Homeyou — Air Duct Cleaning in Kirkland, WA costs, Homeyou — Chimney Repair in Bothell, WA costs, Homeyou — Chimney Repair in Kirkland, WA costs, Homeyou — Chimney Sweeping in Kirkland, WA costs.

Published by others — not our quote

What chimney relining costs nationally

Nobody outside our network lists a Kirkland-area price for this job that we could find, which is why the figures here are nationwide averages. Not our quote.

  • $1,800–$4,000 per project

    US national · Not our quote

    National range; typical $2,500 for a flexible double-wall stainless steel liner (updated January 31, 2025).

What moves the price

Every figure below is published by a third party. Not our quote.

The liner itself
No Northshore relining price is published. Fixr's US range runs $1,800 to $4,000, and a flexible double-wall stainless steel liner typically lands near $2,500.

A typical job, at our prices

How the bill adds up

A job at the bottom of our listed price for chimney relining — yours is set in writing after the inspection.

Typical chimney relining job, priced on our own grid
StepCost
On-site inspectionPaid at the visit, credited toward the quote once you approve it$99
The chimney relining itselfBalance due after the inspection credit$1,801

The total came to $1,900 before sales tax — our listed starting price for chimney relining, with the inspection counted inside it, not on top.

Washington rules that apply

Chimney relining cost — questions

What do other companies charge for chimney relining?

No Kirkland or Northshore price for chimney relining was found from a company outside our network, so we publish national figures only, not our quote: Fixr — Chimney Liner Installation Cost: $1,800–$4,000 per project (US national, accessed 2026-09-29). Not our quote — what we charge is shown at the top of this page.

Must a masonry chimney be lined under the state code?

The 2021 Washington State Residential Code requires masonry chimneys to be lined (R1003.11) with ASTM C315 clay liners, UL 1777 listed lining systems, listed factory-built chimneys or other approved materials that resist flue gases and condensate up to 1,800°F, and requires a 2-inch airspace to combustibles for chimneys inside or on an exterior wall (1 inch if entirely outside) (R1003.18).

Common questions

Questions about chimney relining?

The exact price for your chimney is set on site, in writing, after the $99 plus tax inspection. Our FAQ covers booking, the inspection and where we work.

All our chimney pricesMore chimney questions, answered

Get in touch

Book an inspection

Ready for a clear, written chimney relining quote?

Book your inspection — $99 plus tax on-site inspection, credited toward an approved quote.

Book an inspection

Book your $99 inspection

$99 plus tax, deducted when you approve the repair

Service
Town

Book your $99 inspection

Pick a real open slot on our crew's calendar — takes about a minute.

  • No payment to book
  • Written on-site quote
  • Photos of every job
  1. 1
  2. 2
  3. 3
  4. 4

Chimney Relining in Kirkland

Pick a date
October 2026
Su
Mo
Tu
We
Th
Fr
Sa
Open times

Loading open times…

Call (425) 793-2992Book